From 7d3798f2a7c28d558d975d1844bb729fe8de0923 Mon Sep 17 00:00:00 2001
From: Nikita Kostovsky <nikita@kostovsky.me>
Date: Wed, 7 Jan 2026 15:20:08 +0100
Subject: add fans and radxa; implement body prototype

---
 body/m12_lense_holder.scad | 45 ++++++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 21 deletions(-)

(limited to 'body/m12_lense_holder.scad')

diff --git a/body/m12_lense_holder.scad b/body/m12_lense_holder.scad
index 55c3309..05ff757 100644
--- a/body/m12_lense_holder.scad
+++ b/body/m12_lense_holder.scad
@@ -55,28 +55,31 @@ module m12_lense_holder_wo_holes()
 
 module m12_lense_holder_holes()
 {
-    // left screw hole
-    translate($m12_lense_holder_l_hole_offset)
-    cylinder(
-        $fn = diameterToFn($m12_lense_holder_sh_inner_d),
-        h = $m12_lense_holder_bottom_h * 3,
-        d = $m12_lense_holder_sh_inner_d,
-        center = true);
+    rotate([-90, 0, 0])
+    {
+        // left screw hole
+        translate($m12_lense_holder_l_hole_offset)
+        cylinder(
+            $fn = diameterToFn($m12_lense_holder_sh_inner_d),
+            h = $m12_lense_holder_bottom_h * 3,
+            d = $m12_lense_holder_sh_inner_d,
+            center = true);
 
-    // right screw hole
-    translate($m12_lense_holder_r_hole_offset)
-    cylinder(
-        $fn = diameterToFn($m12_lense_holder_sh_inner_d),
-        h = $m12_lense_holder_bottom_h * 3,
-        d = $m12_lense_holder_sh_inner_d,
-        center = true);
+        // right screw hole
+        translate($m12_lense_holder_r_hole_offset)
+        cylinder(
+            $fn = diameterToFn($m12_lense_holder_sh_inner_d),
+            h = $m12_lense_holder_bottom_h * 3,
+            d = $m12_lense_holder_sh_inner_d,
+            center = true);
 
-    // lense hole
-    cylinder(
-        $fn = diameterToFn($m12_lense_holder_lense_hole_diameter),
-        d = $m12_lense_holder_lense_hole_diameter,
-        h = ($m12_lense_holder_bottom_h + $m12_lense_holder_top_h) * 3,
-        center = true);
+        // lense hole
+        cylinder(
+            $fn = diameterToFn($m12_lense_holder_lense_hole_diameter),
+            d = $m12_lense_holder_lense_hole_diameter,
+            h = ($m12_lense_holder_bottom_h + $m12_lense_holder_top_h) * 3,
+            center = true);
+    }
 }
    
 module m12_lense_holder()
@@ -90,4 +93,4 @@ module m12_lense_holder()
 }
 
 //m12_lense_holder();
-m12_lense_holder_wo_holes();
\ No newline at end of file
+//m12_lense_holder_wo_holes();
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2