From 3939d642549b13760e53686b516e48022f37eb10 Mon Sep 17 00:00:00 2001
From: Nikita Kostovsky <nikita@kostovsky.me>
Date: Sun, 25 Jan 2026 13:07:05 +0100
Subject: try another way for laser/m12 lense holders

---
 body/veye_imx287.scad | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

(limited to 'body/veye_imx287.scad')

diff --git a/body/veye_imx287.scad b/body/veye_imx287.scad
index 85ebcf6..dd08c0b 100644
--- a/body/veye_imx287.scad
+++ b/body/veye_imx287.scad
@@ -119,7 +119,8 @@ module veye_imx287_mount_plate_outer()
     cr = veye_imx287_mount_plate_corner_radius;
 
     translate(veye_imx287_mount_plate_offset())
-    hull()
+    color("green", 0.1)
+    *hull()
     {
         for (
             dx = [w / 2 - cr, -w / 2 + cr],
@@ -131,6 +132,22 @@ module veye_imx287_mount_plate_outer()
             cylinder($fn = dToFn(cr * 2), r = cr, h = t);
         }
     }
+    
+    color("blue", 0.5)
+    translate([0, 1 / 2 - imx287_thickness + $tiny_padding, 0])
+    cube([w, 1, h], center = true);
+}
+
+module veye_imx287_mount_plate_outer_top()
+{
+    w = veye_imx287_pcb_w;
+    h = veye_imx287_pcb_h;
+    t = veye_imx287_mount_plate_thickness;
+    cr = veye_imx287_mount_plate_corner_radius;
+
+    color("pink", 0.5)
+    translate([0, 1 / 2 - imx287_thickness + $tiny_padding, h / 2 + 1 / 2])
+    cube([w, 1, 1], center = true);
 }
 
 // inner area to cut
@@ -212,12 +229,12 @@ module veye_imx287_mount_plate()
     }
 }
 
-color("yellow", 0.1)
+color("yellow", 0.4)
 *veye_imx287_natural();
 color("green", 0.4)
 *veye_imx287_mount_plate();
 
-color("red", 0.1)
+color("red", 0.4)
 *veye_imx287_mount_plate_outer();
 color("green", 0.3)
 *veye_imx287_mount_plate_inner();
@@ -230,3 +247,5 @@ color("green", 0.3)
     veye_imx287_mount_plate_inner();
 }
 
+*veye_imx287_mount_plate_outer();
+*veye_imx287_mount_plate_outer_top();
\ No newline at end of file
-- 
cgit v1.2.3-70-g09d2