include <helpers.scad>
include <holes.scad>

// 80 35 15

// screw holes on back plate
// 42.5 47.5

// back plate height from profile 47, thickness 10
// full h 67
back_plate_s = [80, 10, 67];
bps = back_plate_s;
// dist bitw back plate and back screw holder 26
bp_bsh_dist = 26;

// openscad y is scanner z, and wise versa
back_screw_holder_s = [80, 15, 35];
bshs = back_screw_holder_s;

// for base part mounted on profiles
base_wall_thickness = 10;
bwt = base_wall_thickness;

side_wall_s = [bwt, 50, 55];
sws = side_wall_s;

module profile_20x20x50()
{
    scale([1, 1, 2])
    translate([-0.06, -61, -10])
    import("Modular profile 20x20 - 973094/files/Profilo_20x20_L50.stl");
}

// back plate/motor holder
color("black", 0.5)
translate([0, -bps[1] / 2, bps[2] / 2 - 20])
cube(bps, center = true);

// back screw holder
color("black", 0.5)
translate([0, bshs[1] / 2 + bp_bsh_dist, bshs[2] / 2])
cube(bshs, center = true);

// profiles base
color("grey")
{
    translate([-(bshs[0] - 20) / 2, 0, -20 / 2])
    rotate([-90, 0, 0])
    profile_20x20x50();

    translate([(bshs[0] - 20) / 2, 0, -20 / 2])
    rotate([-90, 0, 0])
    profile_20x20x50();
}

// base
color("orange", 0.4)
union()
{
    translate([-sws[0] / 2 - bshs[0] / 2, sws[1] / 2, sws[2] / 2 - 20])
    cube(sws, center = true);
    
    translate([sws[0] / 2 + bshs[0] / 2, sws[1] / 2, sws[2] / 2 - 20])
    cube(sws, center = true);
    
    top_s = [bshs[0] + bwt * 2, sws[1], bwt];
    translate([0, top_s[1] / 2, top_s[2] / 2 + bshs[2]])
    cube(top_s, center = true);
}