prepared body with all holes except mounting holes

1 files changed, 80 insertions, 36 deletions

diff --git a/body/body.scad b/body/body.scad
index 127d005..1db4742 100644
--- a/body/body.scad
+++ b/body/body.scad
@@ -1,3 +1,4 @@
+include <body_config.scad>
 include <design.scad>
 include <helpers.scad>
 include <holes.scad>
@@ -8,24 +9,6 @@ include <noctua_nf_a4x20.scad>
 include <radxa_zero_3e.scad>
 include <veye_imx287.scad>
 
-// main frame size
-// in scanner coords
-// inner height is a bit random
-// TODO: choose constant size to use one frame for
-// many similar ranges
-main_frame_height_y = 150;
-main_frame_width_x = 34;
-main_frame_depth_z = 56;
-
-// wall and wall thickness
-$sbfwo = $scannerBodyFrontWallOffsetMm;
-$wawt = -$scannerBodyFrontWallOffsetMm + $scannerBodyWallThicknessMm;
-wt = $scannerBodyWallThicknessMm;
-wzo = $scannerBodyFrontWallOffsetMm;
-
-// scanner coords
-fan_y_offset = 80;
-
 module cam_and_lense_new()
 {
     lhs = laser_holder_size();
@@ -559,35 +542,72 @@ module scanner_main_frame()
         }
     }
     
+    // back wall, bottom
+    translate([0, bwo, 10])
+    hole_holder_hot_inserts(hs = hole_side_back);
+    
+    // back wall, top
+    translate([0, bwo, 120])
+    hole_holder_hot_inserts(hs = hole_side_back);
+    
+    // top wall
+    translate([0, 0, two])
+    hole_holder_hot_inserts(hs = hole_side_top);
+    
+    // front wall, bottom
+    translate([0, fwo, 12])
+    hole_holder_hot_inserts(hs = hole_side_front);
+    
+    // front wall, top
+    translate([0, fwo, 83])
+    hole_holder_hot_inserts(hs = hole_side_front);
+    
     // TODO: and now add some stands for screwing left/right covers
     // TODO: simplify inner cut cube after implementing this:
     // rounded corners won't be needed anymore
 
     // chinese fan
     //translate([0, -$scannerBodyFrontWallOffsetMm, 40])
-    translate([0, -wzo - id, fan_y_offset])
+    *translate([0, bwo, fan_y_offset])
     ld3007ms();
 }
 
-module m12_connectors()
+// s - scale
+module m12_connectors(s = [1, 1, 1])
 {
-    // inner height, width, depth and radius
+    // inner height, width, depth and radius (scanner coords)
     ih = main_frame_height_y;
     iw = main_frame_width_x;
     id = main_frame_depth_z;
     ir = wt;
     
+    // scanner coords
+    bottom_connector_y = 28;
+    bcy = bottom_connector_y;
+    
+    m12tpd = m12_male_conn_body_thick_part_d;
+    
     {
         // add outer m12 connectors
         //scale([1.05, 1, 1.05])
-        translate([0, -wzo - id + $tiny_padding, 20 + m12_male_conn_body_thick_part_d + 5])
+        //     scale([1.1, 1, 1.1])
+        translate([0, bwo + $tiny_padding, bcy + m12tpd + 5])
+        scale(s)
         m12_female_connector();
         
-        translate([0, -wzo - id + $tiny_padding, 20])
+        translate([0, bwo + $tiny_padding, bcy])
+        scale(s)
         m12_male_connector();
     }
 }
 
+module m12_connectors_to_cut()
+{
+    //translate([0, $tiny_padding * 50, 0])
+    
+    m12_connectors([1.05, 1, 1.05]);
+}
+
 module laser_with_holder()
 {
     translate([0, -$laserZOffsetMm, 0])
@@ -600,20 +620,33 @@ module laser_with_holder()
 module body_fan_holes()
 {
     id = main_frame_depth_z;
-    translate([0, -wzo - id, fan_y_offset])
+    translate([0, fwo, fan_y_offset])
     ld3007ms_holes();
 }
 
 module radxa()
 {
     translate([0, 0, 20])
-    translate([
-        0,
-        -$scannerBodyFrontWallOffsetMm - 5,
-        radxa_zero_3e_pcb_h - 10])
+    translate([0, fwo - 13, radxa_zero_3e_pcb_h - 5])
     rotate([90, 0, 0])
     //radxa_zero_3e_with_protoboard();
-    radxa_zero_3e_with_protoboard_and_connectors();
+    {
+        radxa_zero_3e_with_protoboard_and_connectors();
+        %radxa_zero_3e_mount_plate_with_holes();
+    }
+}
+
+module radxa_body_cutter()
+{
+    translate([0, 0, 20])
+    translate([0, fwo - 13, radxa_zero_3e_pcb_h - 5])
+    rotate([90, 0, 0])
+    *radxa_zero_3e_mount_plate_holes();
+    
+    translate([0, 0, 20])
+    translate([0, fwo, radxa_zero_3e_pcb_h - 5])
+    rotate([90, 0, 0])
+    radxa_zero_3e_mount_plate_outer_holes();
 }
 
 module other()
@@ -638,7 +671,7 @@ module other()
 // visual block
 
 // visualize camera
-union()
+*union()
 {
     translate([0, 0, $lenseYPosMm])
     %rotate([-$opticalAxisAngleDegrees, 0, 0])
@@ -658,7 +691,7 @@ union()
     }
 }
 
-union()
+*union()
 {
     other();
 
@@ -671,10 +704,14 @@ union()
         camera_hole();
         laser_glass_hole();
         laser_holder_screw_holes();
-        m12_connectors();
+        m12_connectors_to_cut();
+        //m12_connectors_to_cut();
         cam_lense_holder_screw_holes();
-        body_fan_holes();
+        //body_fan_holes();
+        radxa_body_cutter();
     }
+    %m12_connectors();
+    //m12_connectors_to_cut();
 }
 
 // printing cam/lense holder
@@ -690,17 +727,24 @@ union()
 }
 
 // printing body
-*difference()
+difference()
 {
     scanner_main_frame();
     camera_hole();
     laser_glass_hole();
     laser_holder_screw_holes();
-    m12_connectors();
+    //m12_connectors();
+    m12_connectors_to_cut();
+    //body_fan_holes();
+    radxa_body_cutter();
 }
 
 *translate([0, -$laserZOffsetMm, 0])
 {
     %laser_body();
     laser_holder();
-}
\ No newline at end of file
+}
+
+//m12_connectors();
+//m12_connectors_to_cut();
+//radxa_body_cutter();
\ No newline at end of file