1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
|
include <design.scad>
include <helpers.scad>
include <m12_connectors.scad>
include <m12_lense_holder.scad>
include <m12_lense_holder_adapter.scad>
include <noctua_nf_a4x20.scad>
include <radxa_zero_3e.scad>
include <veye_imx287.scad>
module cam_and_lense()
{
translate([0, 0, $lenseYPosMm])
rotate([-$opticalAxisAngleDegrees, 0, 0])
{
m12_lense_holder();
%m12_lense();
translate([0, -$lenseSensorDistanceMm, 0])
rotate([$sensorLenseAngleDegrees, 0, 0])
veye_imx287_natural();
}
}
cam_and_lense();
// laser
translate([0, -$laserZOffsetMm, 0])
{
%laser_body();
laser_holder();
}
// radxa
translate([0, 0, 20])
translate([0, 10, radxa_zero_3e_pcb_h - 5])
rotate([90, 0, 0])
//radxa_zero_3e_with_protoboard();
radxa_zero_3e_with_protoboard_and_connectors();
// noctua fan
//translate([0, -$laserBodyLengthMm, $lenseYPosMm + 20])
translate([0, -$scannerBodyFrontWallOffsetMm, 40])
*noctua_nf_a4x20();
// chinese fan
translate([0, -$scannerBodyFrontWallOffsetMm, 40])
%ld3007ms();
// main frame
module scanner_main_frame()
{
lhs = laser_holder_size();
wt = $scannerBodyWallThicknessMm;
wzo = $scannerBodyFrontWallOffsetMm;
// in scanner coords
// inner height is a bit random
// TODO: choose constant size to use one frame for
// many similar ranges
main_frame_height_y = 150;
main_frame_width_x = 34;
main_frame_depth_z = 65;
// inner height, width, depth and radius
ih = main_frame_height_y;
iw = main_frame_width_x;
id = main_frame_depth_z;
ir = wt;
// front wall
translate([-iw / 2, -wzo, -lhs[2] / 2])
cube([iw, wt, ih]);
// back wall
translate([0, -wzo - id, 0])
// initial positioning
translate([-iw / 2, -wt, -lhs[2] / 2])
cube([iw, wt, ih]);
// bottom wall
// apply body sizes
translate([0, -wzo, -lhs[2] / 2])
// initial positioning
translate([0, -id / 2, -wt / 2])
cube([iw, id, wt], center = true);
// top wall
// apply body sizes
translate([0, -wzo, -lhs[2] / 2 + ih])
// initial positioning
translate([0, -id / 2, wt / 2])
cube([iw, id, wt], center = true);
// now try to cut body with rounded corners to simplify
// cnc manufacturing
difference()
{
hull()
{
// outer cylinders
union()
{
for (yd = [0, -id], zd = [0, ih])
{
translate([0, -wzo + yd, -lhs[2] / 2 + zd])
rotate([0, 90, 0])
cylinder($fn = dToFn(ir * 2), r = ir, h = iw, center = true);
}
}
}
// inner cylinders
hull()
{
union()
{
for (yd = [0 - ir, -id + ir], zd = [0 + ir, ih - ir])
{
translate([0, -wzo + yd, -lhs[2] / 2 + zd])
rotate([0, 90, 0])
// scale by x a bit to fully cut
cylinder($fn = dToFn(ir * 2), r = ir, h = iw * 1.1, center = true);
}
}
}
}
// TODO: and now add some stands for screwing left/right covers
// TODO: simplify inner cut cube after implementing this:
// rounded corners won't be needed anymore
// add outer m12 connectors
translate([0, -wzo - id, 20 + m12_male_conn_body_thick_part_d + 5])
m12_female_connector();
translate([0, -wzo - id, 20])
m12_male_connector();
}
%scanner_main_frame();
|
